Not only is it a full size bed quilt, for our BIG bed, but also it is the final item to be made for the City and Guilds Cert course. So it has to be designed with the brief in mind, and executed to the best of my ability. Now I can do this, I know I can. But being me, I am not going to make it easy for myself, am I?! And I want to make something that I am proud of, that I will be really happy with. No pressure then!
I have long been wanting to make a medallion; I love medallion quilts, and I have never made one. And a square shape will suit our bed so that's ideal.
Also, I have once made a throw size feathered star quilt top (still to be quilted...but that's another story), and I would love to make another. So that's what it is going to be; a medallion with a feathered star centre.
Fast forward some weeks - this has been started a month or two ago - and the brief is written, fabrics gathered, feathered star pattern drawn, and order of construction worked out. Templates have been made, and used, and the feathered star has been sewn together. It is an elaborate feathered star (told you I was not going to make this easy) and I LOVE it.
The rest of the medallion is build up of plain strips, squares, and half square triangle (HST) strips. Which seems rather boring after the intricacy of the centre. So I have decided to liven it up a bit. I am introducing a bit of a sparkle, and a touch of improv, into an otherwise very strictly geometric design. It will be only a touch, mind you, but I do like to introduce a little twist or two into a project.
The first twist I have added, is what I am calling a twinkle - it most likely has been done before, and may have a "proper" name, but I don't know. So I may as well give it a name I like! - Twinkles are small strips of contrasting colour inserted into one round of plain strips in the medallion, in this case to indicate a touch of a starbeam showing - I cannot find "starbeam" in the dictionary, but in the context of this quilt it obviously means a beam of star light - This is what I did:
* Place the strips where they are to go (around the existing centre), and indicate with a pin where the twinkle will be. In this case I placed the tape measure across, and stuck a pin at the correct angle into the right hand strip, and in the bottom strip:
* Take the medallion strip to your cutting board:
|align the twinkle strip (yellow) with your marker (pin)|
|cut the twinkle strip even with your base strip (blue)|
|cut the base strip along one side of the twinkle|
|the pieces you end up with|
Now the most important step:
* Mark 1/4" from the edge that is to be sewn to the main strip (on the wrong side of the fabric). I marked only at the edges which will be in the seam allowance so the marks will not be visible later.
|marking 1/4" from the inserting edge|
|marked 1/4" on both sides|
* align edges to be sewn. Make sure that the twinkle fabric (yellow) is shifted so that the 1/4" marks are placed at the edge of the main strip (blue). The pieces are sticking out and do not appear to be correctly placed (but they are...):
* Sew a 1/4" seam, and repeat for the second seam. And there you have it:
|twinkled strip sewn to medallion centre|
I am happy with it and it went together so easily!
So after all that back to the cutting board. After all, I have a load of HST to be cut for the next border...