Monday, 11 May 2015

A Box for City & Guilds - Another Finish!

Now the City & Guilds is really finished, it is high time to put up a post on the fifth item that I made as part of the course. Why did I wait so long? Well, let's just say I lost interest at some point and it took forever to pick it up and finish the last few stitches...

One of the five "Items" for the City and Guilds Certificate needs to be a three-dimensional item, and I had decided to make a box. This box is intended to be used for appliqué and patchwork blocks; to store them together, and/or to take them with me, together with fabrics and hand sewing materials, so I can work on them in classes or anywhere else, really. In short, a work box.




The inspiration was taken from images of Tulips (I had to get some Dutch influence in there somewhere, I suppose). I have always liked botanical drawings, so I started out with a few of those and drew and re-drew tulips until I had an image I was pleased with. The idea was to applique the tulip flower and some leaves.

Then I found some lovely silks, heavily discounted (fortunately), but not quite the right colour (unfortunately?). The heavier dupion silk is a green-grey curtain material with a slight slubby effect, and quite firm. Ideal for the box. The drapier satin silk I found in the wedding section, but of course it was white. This then made me take out my silk paints, and have some fun! It was good I did not have an unlimited supply of silk to play with or else I would still be having silk painting fun - and no stitching would have been done on the box at all!

After a lot of samples:
Trying out sea salt effects on silk paint - sample

Mixing and blending to get the right colour for the leaf and stem - samples
Then the "real" work started, a bit scary, because by that time I was down to just enough fabric to make my piece...

Painting the piece of silk to use for the tulip flower
Fortunately, it all worked out just fine! So, then the sewing started:


The leaf/stem shape, and the flower shape were transferred to the dupion silk, and reverse (hand) appliquéd into place. This actually went very fast!


Then the piece was quilted, and stretched over the grey board panel with some extra padding. As you can see in the picture above, I also (foundation/paper) pieced side panels for the box - and left the paper in for stability.

The box panels were slip stitched together, then I added extra stitching to the top edge:


Tabs for the handles were added during construction as well, and the handles themselves were cut to size from a kindly donated lecturer's stick...

So there you have it:




Another job done...

Sandra

Friday, 8 May 2015

Ending City & Guilds with a star...

... and an exhibition in Nadelwelt, Karlsruhe


- warning: photo heavy post -

This week saw this:


It was the last stitch on the binding of the big bed quilt I made as part of "my course". To be precise; the City & Guilds course in Craft and Design for Patchwork and Quilting, level 3 Certificate.

This quilt has been rather long in the making, and of course it needed a deadline to get to this stage! Today this quilt, along with ALL my City & Guilds makes, were being sent to Germany to be exhibited... so the last threads were only tied off 5 minutes before I jumped in the car to deliver it yesterday evening!

A few days ago all my other course material went to our tutor, to be sorted and packed up:



There were two boxes full of samples, ranging from EPP to hand piecing, machine piecing, hand and machine appliqué, hand and machine quilting, crazy piecing, hawaiian appliqué, Mola, Kantha, Sashiko, strip piecing, etc. etc. Then some note books, and a huge folder full of our art work, divided into colour, line, shape, texture, form.

Five items were designed and made during the course and each has its own folder with the design process and samples of all techniques considered (just visible on the left). Then there are the five items themselves: a cushion, bag, box, wall hanging and bed quilt.
Seeing it all together like that I realised why I have not had time for much other sewing in the last few years...

Ah, but you're not here to hear about all the design work in the course or even  to see that last measly stitch on my quilt! So, here is the full reveal:





Hand and (domestic) machine quilting was used on this quilt:



As you can see in the last photograph, the hand quilting is not quite finished - it will be done, I promise - but at least all the quilting that I planned has been started so you can see how it will look in the end.

And the sleeve is on, as well as the label:


Which was very important since like I said, all the work is to be sent to Germany. We (my co-students and tutors) are having an exhibition booth at the large Nadelwelt event in Karlsruhe where we are showing what is really involved in doing a City & Guilds course in Craft and Design. Not just the end results, but the whole process will be shown to the public.

So, if anyone is in the Karlsruhe area on 15 - 17 May, do come along and have a look and a chat, there is bound to be one of my co-students around. And there is some hand quilting action planned, too.

For now, I am trying to get some more blog posts written, and I'll have a leisurely ponder on a next project to work on. One that has nothing to do with any course!

Sandra

Wednesday, 22 April 2015

Wall Hanging for City and Guilds - updated with a label

Do you remember this one:



Back in November I announced that the Wall Hanging that I made for the City & Guilds Certificate was finished. So why an update?!

That is because though the wall hanging itself was completely stitched, it wasn't completely finished. It was appliquéd, quilted, embellished with stitching and flanges, all threads were tied off and hidden away, and the back was covered with another layer for a neat finish. The edges were finished with a facing. Even the tunnel is in place to hang it with.

But the all-important LABEL was still missing!!

So this has been rectified today. I thought I would show you how I make my labels:

* In WORD, I type the text of the label. My labels always contain the TITLE of the quilt, the NAME of the maker (myself, hah!), LOCATION of the maker (this has varied over time), DATE finished. If appropriate I would add to whom I am gifting it, and sometimes when I had started the quilt; in this case I've added that it was made as part of the City & Guilds course:


* I then select all text (CTRL-A), centre the text, choose a nice, but clear font, and increase the font size to an easily readable size. PRINT.

* Trace the text with pencil onto a piece of calico or other light coloured fabric. I use a piece easily large enough for the label, trimming to size is done after the lettering. I wash the fabric first to remove any sizing, and iron well. Tracing is easy against a light window, I use masking tape to keep the printout and fabric together. The letters came out crookedly against the edges of the fabric, but that was so that the letters are straight with the grain of the fabric (this piece of fabric was very uneven).

* Trace the letters again over the pencil with a permanent marker (use some scrap paper underneath to prevent marking the table underneath). I used a Pigma pen this time, but I have also used a Tee-Juice pen before with good result. I usually mark with pencil first, because it is easier to do that against the window, and also, the marker may mark my printed template through the fabric. I want to keep the template clean in case I make a mistake and have to start again... though fortunately it has never come to that!


* IRON over the pen lettering to set it good and proper! Then also mark the outline of the label's edges. I measured about 1" outside the edges of the lettering on all sides, making sure the lines are square and parallel to the text. If you are not sure how well your pen ink will hold when washing, now is the time to test it...

* Press in the corners of the label, so that the corner marking is just turned to the wrong side of the label:


* Then fold and press each edge over so that all markings are just folded over to the back:


* Give the whole label another good press to set all the folds (I sometimes use a damp pressing cloth for extra sharp creases):


* And there is your prepared label:


* Pin to the back of your quilt, and slip stitch in place:


DONE! (The photograph is slightly angled, the label is really straight on the quilt!!)

And now I am updating anyway, I have also added some stats to the original post!

Sandra